Arrow Rest: Types, Setup & Tuning Basics

An arrow rest is an apparatus attached to a bow that holds and precisely locates an arrow during the shot. Its primary job is to raise the arrow off the riser shelf so that fletching, vanes, and arrow points can pass cleanly without contact or interference as the string is released.
Arrow Rest Types
Bow arrow rest designs fall into three main categories:
- Launcher rests — A prong or blade supports the arrow through the draw and shot. The simple design minimizes contact with vanes, but nothing holds the arrow in place if the bow is tilted. Best suited to indoor target shooting.
- Drop-away rests — Support the arrow at full draw, then fall clear of the shaft the moment the string is released. Limb-driven models use a cord tied to a bow limb; inertia models attach to the down cable and release only on string firing. Drop-aways are widely used by both target archers and bowhunters.
- Full-capture rests — Multiple contact points surround the shaft, keeping the arrow secure at any angle. Because the rest grips the arrow more firmly, tuning must be precise; if one side affects the shaft more than the other, arrow flight suffers.
Recurve and Traditional Options
For recurve bows, the two common advanced styles are stick-on rests and wrap-around rests. Stick-on rests adhere directly to the shelf side of the bow riser; wrap-around rests mount under the plunger collar and some models offer micro-adjustment. Traditional archers who shoot off the shelf typically use felt, leather, or hair shelf rests — materials that allow feather fletching to fold flat as the arrow passes, unlike plastic vanes, which can cause erratic flight.
Critical Setup Parameters
Two measurements matter most when fitting an archery arrow rest:
- Center shot — Align the arrow point just outside the string (left of string for right-handed archers). Adjust via the plunger button, which also fine-tunes horizontal arrow pressure.
- Nocking point height — Set with a bow square (T-square) clamped to the string. Barebow archers typically start at ½ inch high; Olympic recurve and traditional archers start at ⅜ inch. A bottom nocking point tied roughly 1/16 inch below the nock prevents nock pinch without restricting the shot.
When switching arrow diameters — for example, moving from outdoor to indoor arrows — rest height and blade width must be readjusted. The centershot alignment should be re-verified any time you change arrows or rest components. Understanding how the rest interacts with the arrow shelf and the archer's paradox helps explain why small adjustments have a large effect on arrow flight.
At a glance
The four main bow types
Most archery bows fall into one of these four families. Click any to read its full definition.
PAIR WITH THIS ARTICLE
Learned something ? Now what?
Pick how you shoot — we'll surface the three Legend products that pair with this build.
